Plating Operator -Graveyard

Sanmina Corporation (Nasdaq: SANM) is a leading integrated manufacturing solutions provider serving the fastest growing segments of the global Electronics Manufacturing Services (EMS) market. Recognized as a technology leader, Sanmina Corporation provides end-to-end manufacturing solutions, delivering superior quality and support to Original Equipment Manufacturers (OEMs) primarily in the communications networks, defense and aerospace, industrial and semiconductor systems, medical, multimedia, computing and storage, automotive and clean technology sectors. Sanmina Corporation has facilities strategically located in key regions throughout the world.

Job Purpose: Candidate will be making chemical adds to baths or sumps to ensure PWB's are properly etched.

Nature of Duties/Responsibilities

• Through use of a computer interface, candidate must be able to enter operating parameters, job information and view various screens to decipher proper operating settings.
• Be able to operate and maintain the various pieces of equipment within the department.
• Measure out the proper quantities and make chemical adds to baths or sumps.
• Manually set up and transfer solution between tanks, totes, or barrels.
• Replace filter material used throughout the various process tanks.
• Clean, dry and properly dispose of used filter material.
• Perform general housekeeping through the entire area. Inspect product for defects and conformance to process specifications.
• Be able to extract various computer reports.
• Provide assistance in performing routine preventative maintenance.
• Scrubbing and cleaning of mechanical devices or hardware.
• Assist in replacement of non-precision mechanical devices.
• Candidate would be required to work on, in, and around open sumps, plating tanks or mechanical hoists.

Education and Experience

• High School Education
• Minimum of 1 year Industry experience preferred
• Familiarity with computers
• Ability to work in and around chemicals
• Good manual dexterity
• Position will require candidate to stand, walk, push and pull transportation carts between depts.
• Must have good verbal and written communication skills.
• Must be available to work overtime and weekends.
• Knowledge in the following PCB plating equipment and processes: Outer Layer etch (SES), Tin Plating, electroytic copper plating, Electroless process.
• Ability to lift up to 50lbs
• Good Visual acuity

This is an ITAR facility and applicant must be a US Citizen or a lawful permanent resident.

Sanmina is an Equal Opportunity Employer

Salary Range(annual): $39,520.00 - $41,600.00